Contact Us
Wired automation organizes the connections between field devices and monitoring and control infrastructure according to the physical structure of the facility. Fetrion; It addresses hardware, embedded software and central monitoring needs together.
Sensors, meters and control devices may have different connection and communication needs. The first step is to determine the model of devices, accessible data points, and existing cabling infrastructure. This way, it can be clearly defined which data to read and which function to control.
The Modbus and SCADA integration approaches we offer on the site are evaluated through the interfaces supported by the devices. Data addresses and application details of devices with the same protocol name may differ. Compatibility should be verified by device documentation and field testing.
Panel locations, connection distances, environmental conditions and maintenance access influence the design. When choosing a wired connection, not only new lines but also the continuity of operation of the existing facility are taken into account. The material and connection method suitable for the application are determined on a project-specific basis.
The equipment list, available panel information, wiring diagram if available, and desired monitoring or control functions speed up the evaluation. If wired and wireless sections must be used together, data transfer and interruption behavior between them are also planned.
Definite suitability cannot be promised without examining the cable type, condition, route and target communication conditions.
Interfaces, data points and control capabilities are evaluated through models and technical documents.
Wired automation; It is a structure where sensors, control devices and other equipment exchange information via physical cable connections. The electrical properties of the connection and the communication protocol that defines the meaning of the data are separate issues. Both need to be examined for compatibility.
No. Electrical interface and protocol support are different features; The device documentation should be examined.
Integration can be evaluated if there is a compatible interface, protocol and data map; Brand difference or being the same brand alone is not enough.
Share your current infrastructure and needs; Let's determine the scope of measurement, hardware and software together.
Request a Project Quote